Used Cushion Tire Forklift Simi Valley - While forklift trucks are often classified by the type of work they perform under most circumstances, forklift trucks can also be classified by the type of tire they are fitted with. There are two main kinds of tire classification for forklifts, pneumatic and cushion tire.
When considering the benefits and drawbacks of cushion tires in forklift uses, it is important to discuss the benefits and drawbacks of the other available forklift tire option: the pneumatic tire. The drawbacks and benefits of cushion tire models can be only compared when the drawbacks and benefits of the pneumatic tires are also discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires are made up of either smooth or treaded solid rubber and are designed around a metal ring or baseband. These types of forklift tires are easier to maintain and less expensive to manufacture. Cushion tires are designed for smooth surface applications such as work that takes place mostly indoors or around loading docks. Cushion tires make travelling in tight locations much easier to navigate around corners due to their tight radius. Cushion tires also allow the forklift to sit closer to the ground. The advantage of a lower forklift is the increased vertical clearance when compared to forklifts with pneumatic tires. It is important to note that cushion tires do not offer as much traction compared to pneumatic models and this is noticeable on wet locations and outdoor surfaces.
There are many jobs suitable for cushion tire forklifts such as unloading shipments, transporting items to and from the loading areas, order picking, unloading inventory and more.
Pneumatic Tires
Pneumatic tires, on the other hand, are primarily designed to operate in rougher terrain, with uneven surfaces. These tires have two categorizations:
The solid resilient pneumatic tires are comprised entirely of rubber and the standard air pneumatic tires feature a layered rubber design filled with air.
Pneumatic tire forklifts are excellent choices for working in locations with uneven or unpaved ground outdoors. The solid resilient pneumatic forklift tires are best used in areas such as lumber yards or junkyards and construction sites where there may be sharp metal items on the ground which could puncture the tires.
Benefits of Cushion Tire Forklifts
Forklifts that use cushion tires are a wise option for interior and exterior locations that feature smooth surfaces. The majority of forklifts that rely on cushion tires are used mostly indoors with limited outdoor use. Warehousing applications and manufacturing facilities often rely on cushion tire forklifts. Cushion tire models excel in tight locations including narrow aisles and accessing high shelves.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Most cushion tire forklifts intended for indoor use are electric, which means they are usually smaller and more maneuverable because they do not required the extra room needed to accommodate the larger internal combustion engine.
2) Lower Clearance
Forklifts built for indoor use with cushion tires generally have a lower clearance than pneumatic tire equipment, allowing the forklift to more easily navigate doorways and other obstacles such as lights and sprinkler systems.
3) Durability
Cushion tires for forklifts are durable, easy to maintain and have little to no risk of puncture.
4) Quiet
Cushion tire forklifts do not use an internal combustion engine and instead rely on a battery or fuel cell, making them significantly quieter than their propane or diesel cousins.
5) Environmentally Friendly
Powered by electricity instead of relying on an internal combustion engine enables cushion tire forklifts to make zero dangerous emissions.
Forklift Tire Choice
The majority of forklift frames specify either a pneumatic tire or a cushion tire. Tires and axles are specific to the lifting capacity and the machine’s frame. Most forklift manufacturers design forklifts to operate safely with specific wheels and tires, namely cushion tires or pneumatic tires. Due to their special tire design, it is best to choose the forklift type that will suit the job in terms of forklift tire types.
Workplace Applications
Suitable Work Applications for Cushion Tires
There are many work applications suitable for using cushion tire forklift models. If there is moderate use of the forklift outside on smooth surfaces and the majority of the lifting, loading and transporting will be occurring inside on smooth floors, a cushion tire model is an excellent tool.
Forklifts fitted with cushion tires often have a smaller frame and sit much lower to the ground than forklifts fitted with pneumatic tires. Cushion tire models can fit through doorways easier and avoid overhead obstacles. However, cushion tire forklifts also have less clearance to the ground which can result in cushion tire forklifts getting easily hung up on outdoor obstacles where the surface is not cleared or even. One solution is to outfit traction tires on the front of the cushion tire forklift. Traction based tires will function in rough terrain environments that have wet surfaces, packed gravel and asphalt. These tires are not recommended for travelling on grass or dirt. Traction tires are utilized on the opposite sides, the steer and drive axles.
One of the largest advantages of using a forklift with cushion tires is the smaller turning radius. Cushion tire forklifts are excellent for manufacturing facilities and warehouse operations that are compact with less space. Warehouses that utilize a narrow aisle layout will especially benefit from the smaller turning radius of cushion tire forklifts. Cushion tire forklifts are also less expensive and are more readily available than pneumatic tire forklifts.
Suitable Work Applications for Pneumatic Tire Forklifts
Pneumatic tires forklifts have air in them and are better for outdoor use such as in yard work or on gravel. Pneumatic tires can also be used inside but do not provide the advantages of low clearance, maneuverability or small turning radius. Of course, they are often powered by internal combustion engine so do produce harmful emissions which are not recommended for normal indoor use. With a wider base and longer frame in comparison to cushion tire models, pneumatic tire forklifts are for use mainly outdoors.
The solid pneumatic tire costs more compared to the air pneumatic tire. This is because a solid pneumatic tire is not susceptible to punctures or gouges because they are made of solid rubber and do not have air in them. These solid pneumatic tires are best for scrap yards and lumber yards where the possibility of running over sharp metal scrap and debris, such as nails, in greatly increased. Air-filled pneumatic tires work well on gravel and asphalt exterior surfaces. Air-filled pneumatic tires can easily become punctured and their working environment needs to be evaluated carefully. It is essential to ensure the work site is free from any sharp materials before using a forklift with air pneumatic tires. Since air-filled tires deliver a bouncy sensation, they contribute to operator fatigue and discomfort. It is possible to foam fill the pneumatic forklift tires for a smoother ride. Much less bouncy than air-filled pneumatic tires, the solid pneumatic forklift tires provide the operator with a smoother ride. Flat tires can be filled with foam to keep them more durable and prevent flats. It takes roughly three days to fill and cure an air pneumatic tire with foam.
Difference in Load Capacity
Both cushion tire and pneumatic tire forklifts offer similar load capacities. There may be lift limits on certain electric-powered cushion tire models. There are numerous forklifts available and a variety of pneumatic and cushion tire models can be found in a variety of load capacities. There are numerous load capacities ranging from less than 2000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
