In the majority of situations, most individuals spend quite a bit of money purchasing their forklift. Thus, it is really important to take proper care of it so as to protect your investment well into the long run. It is a great idea to know the procedures that are carried out during taking care of and maintaining this machinery.
Amongst the best ways to tell how good the engine is running is by starting the lift truck up and listening closely to see how it runs. For instance, if there are any misses or knocks, the machine is faulty and this should raise several concerns. Also listen closely for any squealing noise which come from the belts since these noises would provide you with a lot of information.
Some of the main parts needing attention during maintenance include the gauges, horn, safety warning devices, the lights and the overhead guard. Any faulty components or burnt out light bulbs should be replaced as soon as they are noticed. It is also vital to inspect the wiring.
The battery compartment terminals should be cleaned after the above components have been inspected carefully. If the terminals are not clean, be sure to clean them well. Each cell of the battery has to be inspected so as to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machine and then change the filters. The transmission filter, fuel filters and the hydraulic filter must be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
Once the oil change has been carried out and new filters have been fitted, visually check the drive axle from underneath the machinery. Be certain to grease the axle if there is any grease fitting. Inspect the engine belts for any frays or cracks. If you find any, fix the problem accordingly. Next, check every other part of the equipment like the wheels. If any kind of fault or problem is detected, be certain to address it immediately so as to make sure the machinery is running at its safest and optimum levels.