When using rough terrain scissor lifts, it is really vital to use extra caution and be completely aware of your environment so as to maintain safety. The extended booms on the equipment act as levers from the center of the drive unit. For instance, a 6 inch bump can lead to a 3 foot bounce when the driver is at the driver controls. Consider all other traffic in the vicinity, as they might not be aware that you are moving. Plan your assent carefully. Park the boom lift on a flat surface that has no water or mud. These areas cover deep potholes that can be potentially cause the occupants to fall if the tires fell into the holes. If provided, utilize all of the outriggers, fully extended. Be sure to just use wooden chalk blocks that are approved.
A lot of lifts operate from a metal platform on the end of the boom. The long booms act as levers from the drive unit's center. A 6-inch bump could lead to a 3-foot bounce while you are at the driver controls. Be aware of all other traffic. They may not be aware that you are moving. Plan your assent. Park the boom lift on a flat surface free of any mud or water. These areas could cover deep potholes wherein the lift tires could fall, tipping the occupants. Extend all outriggers, if provided, to the full extension position. Place only approved wooden chalk blocks beneath the outrigger pads to prevent the unit from moving.
Overhead power lines are a serious danger for lift operators no matter what lift is being utilized. Like for example, if the driver of the platform is not being aware, or if the platform is being controlled by ground workers that is not able to accurately access proximity to wiring and hence, either the platform itself or the worker could be easily brought into contact with electrical wires. The employee could be electrocuted unfortunately unless correctly insulated.