Change a Propane Tank
Forklifts fueled by propane are common in warehouse settings. These forklifts have a propane mount situated at the rear of the operator. These tanks need to be replaced periodically as they have limited lifespans. Operators of forklifts must always utilize caution when handling propane tanks. Compressed gases are really dangerous, particularly since the gas is flammable. Always utilize caution when replacing and removing propane tank to prevent being injured.
1 If there is a need to change the propane tank, the first step is to stop the lift truck, then turn the tank valve off. The forklift must be left on until the engine dies. This process burns off the gas inside the transfer hose that connects the engine and the tank. Prior to taking the second steps, wear the correct safety equipment, like insulated gloves made of either neoprene or leather. It is vital for you to protect your skin from contact with the compressed gas, that is extremely cold.
2 Disconnect the hose from the tank and take off the holding straps to remove the tank. When putting in a new tank, tighten the nut to reconnect the holding straps and to reconnect the hose at the valve of the tank.
3 You could inspect for leaks by applying soapy water to the valve and slightly opening it. Leaking gas will cause bubbles to foam around the value. If this occurs, inspect the valve area and the connection hose at the nut. The connecting nut should be re-tightened if you detect any leaks around the valve area, and afterward perform the leak inspection procedure over again. Persistent leaks mean that the nut and connecting hose should be replaced. Nonetheless, if replacing the nut and hose still does not stop the leak, the tank must be replaced.
4 Finally, open the valve all the way to allow the gas to fill the connecting hose. Then you can start the lift truck and resume working.